基于强跟踪扩展Kalman滤波的X射线脉冲星导航定轨精度研究

为提高X射线脉冲星导航定轨精度,依据脉冲星导航原理,建立了X射线脉冲星自主导航系统的状态方程和观测方程,提出用强跟踪扩展Kalman滤波（Strong Tracking Extended Kalman Filter,STEKF）替代扩展Kalman滤波,并对3颗脉冲星卫星运行的位置和速度估计进行了仿真实验。仿真结果表明：STEKF具有使滤波器能够自适应地校正估计偏差并迅速跟踪状态变化的能力,有效地提高了卫星运动状态的估计精度和数值稳定性。     

基于遗传算法的跳频通信侦察技术

为了识别跳频序列,提出了采用遗传算法并结合跳频信号特点来完成跳频序列的分析与重组,从而实现跳频信号的侦察。在采用传统遗传算法的基础上,针对序列特点提出了5种改进手段,从而大大提高了算法的效率和可用性。最后利用采样的语音信号,对分析与重组过程进行模拟来验证算法的可行性。     

高性能混凝土耐火性能及对策探讨

高性能混凝土与传统混凝土相比,结构密实,脆性更大,渗透性低,尤其是在火灾高温状态下发生爆裂现象因而造成其抗火性差。为此,提出在高性能混凝土中混掺聚丙烯纤维和钢纤维、外加减水剂及骨料两种技术措施,以提高高性能混凝土的耐火性能。     

月壤参数对月面着陆气囊缓冲性能的影响

为研究月壤参数对气囊缓冲性能的影响,根据“嫦娥三号”的着陆工况设计了月面着陆气囊,并基于可压溃泡沫模型建立了考虑月壤特性的气囊缓冲动力学模型。对不同月壤下气囊的缓冲过程进行分析,发现月壤越软有效载荷冲击加速度越小,但气囊会陷入月壤中,不利于对外排气,影响其缓冲效果。因此,采用气囊峰值压力、有效载荷最大加速度和最大下落高度3个指标对气囊缓冲性能进行综合评价,定量研究了月壤参数的影响规律。结果表明:月壤密度、剪切模量及屈服参数a₀和a₁对缓冲性能的影响较大,且对前两个指标为正影响,对后一个指标为负影响。进一步研究发现,这4个月壤参数与3个缓冲性能指标之间〖BHDWG8,WK10YQ,DK1*2,WK1*2D〗〖XCZX.TIF;%129%129〗听语音 聊科研与作者互动 均为指数函数关系。     

结合流形滤波的矩阵信息几何检测器

针对小样本、非均匀杂波下的信号检测问题,提出一种基于流形滤波的矩阵信息几何检测器,将信号检测问题转化为矩阵流形上的几何问题。将每一个样本的相关性数据建模为一个托普利兹正定矩阵,在此基础上,利用每一个样本数据的邻近矩阵进行加权平滑滤波,去除一部分杂波能量,提升目标与杂波间的区分性。计算了辅助样本数据对应矩阵的几何均值,通过比较待检测样本数据矩阵与几何均值矩阵之间的距离与检测门限的大小,以实现信号检测。实验结果表明,与自适应匹配滤波相比,本文方法在小样本、非均匀杂波下具有明显的性能优势。     

节点实时性能自适应的集群资源分配算法

由于配置和所运行作业的不同,集群各节点的实时性能差异较大。为提高集群性能,提出节点实时性能自适应的集群资源分配算法 (node real-time performance adaptive cluster resource scheduling algorithm,NPARSA)。节点实时性能用其配置(CPU核数及速度、内存容量、磁盘容量)和实时状态参数(CPU、内存和磁盘的剩余数量及磁盘读写速度)表示。NPARSA根据作业类型自主选择节点性能评价指标的权值,实现节点实时性能对于作业类型的自适应。实时性能最优的节点分配给作业。虚拟机实验和物理集群实验表明,与Spark默认资源分配算法、没有考虑作业类型与节点匹配的算法、使用作业和节点匹配差异程度作为资源分配依据的算法相比,NPARSA能更有效地缩短作业执行时间、提高集群性能。     

Thermal hazard assessment of TKX-50-based melt-cast explosive

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based melt-cast explosives were comparatively studied through accelerating rate calorimeter (ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions (HWS mode) and constant heating (CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cook-off experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

指挥控制通信与情报(C3I)系统的评价

综述了目前用于评价Ｃ３Ｉ系统的各类方法与过程,讨论了Ｃ３Ｉ系统的评价框架,并对这个框架下的各种评价方法与过程的长处和不足提出了作者的看法     

机载红外搜索跟踪系统

红外搜索和跟踪（ＩＲＳＴ） 系统是迅速探测红外威胁源的存在, 识别威胁源的种类,测定威胁源的方位并报警的一种光电系统。介绍了对机载ＩＲＳＴ的性能要求, 美国和欧洲等国对机载ＩＲＳＴ的研制及装备概况, 分析了今后机载ＩＲＳＴ系统的发展方向。